Large screen(128×64 dot matrix LCD), showing all functions and
Test at any angle, even upside down.
Wide measuring range. It can measure the hardness of all metallic
materials. Direct display of hardness scales HRB, HRC, HV, HB, HS,
HL and three types of strength values immediately.
Seven impact devices are available for special application.
Automatically identify the type of impact devices.
Large capacity memory could store 500 groups (Relative to average
times32～1 ) information including single measured value, mean
value, testing data, impact direction, impact times, material and
hardness scale etc.
Upper and lower limit can be preset. It will alarm automatically
when the result value exceeding the limit.
Battery information indicates the rest capacity of the battery and
the charge status.
User calibration function.
USB port with the PC humanity multi-functions data proceeding
Original imported high speed thermal printer support the immediate
printing function. It can save data permanently.
NI-MH rechargeable battery as the power source. Charge circuit
integrated inside the instrument. Continuous working period of no
less than 150 hours (EL off and no printing).
Auto power off to save energy.
Excellent after-sale service system for high quality products---two
years’ guarantee and all life maintenance. Easy to buy and
comfortable to use.
Die cavity of molds
Bearings and other parts
Failure analysis of pressure vessel, steam generator and other
Heavy work piece
The installed machinery and permanently assembled parts
Testing surface of a small hollow space
Material identification in the warehouse of metallic materials
Rapid testing in large range and multi-measuring areas for
large-scale work piece
Display:dot matrix LCD,128×64 dots
Data memory: 500 groups max.(relative to impact times 32～1)
Printing paper: width is (57.5±0.5)mm, diameter is 30mm
Battery pack: 6V NI-MH
Battery charger: 9V/500mA
Continuous working period:about 150 hours(With backlight off, no
1 Main Unit 1
2 D type impact device with cable 1
3 Standard test block 1
4 Cleaning brush (I) 1
5 Small support ring 1
6 Battery Charger 1 9V 500mA
7 Paper for printing 1
8 Manual 1
9 DataPro software 1
10 Communication cable 1
11 Instrument case 1